The Bit Converter

You can control how your program runs, or the way an intrinsic performs, by setting certain bits. These bits, ranging from 0 to 15, can be turned on or off by supplying the program with a ;parm= at the end of your run statement.

Select the boxes that represent the bits that you want to turn on. Press Show Parm button, and you will see the parm that you should supply your program, or intrinsic.

Choose your bits:

0	1	2	3	4	5	6	7	8	9	10	11	12	13	14	15

If you have a ;PARM= at the run statement, put that parm in the box. Press the Show Bits button, and see the bits that are set.

%